Replacement fans for Pacific Ventilation

Sigrist manufactures like-for-like replacements for Pacific Ventilation fans. We are an Australian fan manufacturer in Richlands, Brisbane, and we have been building replacements for other manufacturers’ units for more than 35 years. Send us what is on the rating plate and we will quote the equivalent we make.

Pacific Ventilation was formerly Fans Direct, and many plates in the field still carry that name. Either way, it is the same equipment and we can identify it.

What we need from you

One photo of the rating plate is usually enough. If the plate is missing, painted over or unreadable, a photo of the fan and the opening it sits in will get us most of the way.

  • The model number and any other codes on the plate
  • Motor rating in kW, speed, phase and voltage
  • Diameter, and the size of the opening or upstand it mounts on
  • Whether it is exhaust or supply, and whether it is smoke-spill rated

Start here — pick the picture that looks like your fan, or call 07 3271 4415 and read us the plate.

What we would replace it with

Pacific Ventilation makes axial, roof-mounted and centrifugal fans. Depending on the duty and the physical fit, the equivalent normally comes from one of these Sigrist ranges:

Pacific Ventilation and Fans Direct ranges we commonly replace

If the plate carries one of these, we make an equivalent. Send the plate if yours is not listed.

  • AXUS — the axial range, inline single and two speed, contra rotating, run and standby, and bifurcated
  • AX long-cased axial — AX31 through to AX200
  • Roof mounted — LS, LD and LE, 400mm to 1500mm
  • Square plate — SP and DP, 400mm to 1000mm
  • Down flow axial — DQA and VDA, 400mm to 1000mm
  • Impeller series — Titan T100, T190, T200 and T300, and the DA, DB, DC and DD range
  • Silencers and attenuators

A code match is a starting point, not a specification

Fans are replaced on duty and physical fit, not on the code alone. The same code can cover different blade counts, pitch angles, motor ratings and speeds. We use the code to find the family, then confirm the selection against the duty before quoting.

What we do not make

So we do not waste your time: Sigrist does not currently manufacture jet fans or induction fans for car park ventilation, HVLS destratification fans, or VAV diffusers and controls. A jet fan range is in development. Car parks ventilated by ducted axial fans are work we do today, and that is the more common arrangement.

Made here, supplied Australia-wide

Fans are built to order at Richlands and supplied across Australia. Sigrist is a manufacturer, not a service agent: we do not attend site. If you need someone to remove the old unit and fit the new one, that is work for your mechanical services contractor, and we are happy to supply them directly.

Sigrist is not affiliated with, endorsed by, or a distributor for Pacific Ventilation. Pacific Ventilation and its model designations are the property of their owner and are referred to here only to identify the equipment being replaced.

Find a replacement fan  |  07 3271 4415  |  sales@sigrist.com.au